MoldMoreParts.com
Your Online Source for Stoner Molding Solutions
Member of: The Plastics Industry Trade Association Society of Plastics Engineers Association of Rotational Molders Investment Casting Institute American Composites Manufacturers Association
Partner Links: Click to visit DynaPurge and discover how you can reduce down time.
Releasomers Logo

Mold Release Agents and More

Composites Mold Releases

Have a Special Application or Mold Release Need?

We have or can formulate products for your specific molding process and materials, delivery systems, or packaging preference. Click below to discuss the next step.

Click to contact us

FRP-SC Semi-permanent Release (G495)

  • Semi-permanent solvent-based release
  • Formulated for polyester and vinyl ester resin systems
  • For use in both open and closed mold processes
  • Saves time. Fast curing, requires fewer coats
  • A wipe on wipe off release
  • Apply by spraying, brushing, or wiping
  • Click to learn more

FRP-QB Semi-permanent Release (G494)

  • Semi-permanent solvent-based release
  • Formulated for polyester and vinyl ester resin systems
  • For use in both open and closed mold processes
  • Saves time. Fast curing, requires fewer coats
  • No need to wipe off. Formulated for gel coated parts or A finish surfaces
  • Apply by spraying, brushing, or wiping
  • Click to learn more

FRP Release (G492)

  • Time-saving, semi-permanent mold release for molded composite materials
  • Combines fast curing with tougher, chemical and abrasion resistance
  • Cures at ambient temperatures and operates easily above 800°F
  • Versatile, ready to use WOWO (wipe on, wipe off) for gel coated products; WOLO for other finishes
  • Fewer coats, faster cure, increased productivity
  • Excellent for hand lay-up, RTM, vacuum bagging and other processes using a polyester and vinyl ester
  • Click to learn more

FRP Mold Sealer (G491)

  • Cures to a hard gloss film that protects metal and composite tools and keeps them in production longer
  • Hard gloss finish rejuvenates old molds and gives them new life
  • Lets new molds run with ease - less break in time
  • Reduces downtime which adds value to your process
  • Easy to apply - no special tools or procedures needed
  • Boosts productivity – requires fewer coats and cures faster
  • Lower odor
  • Click to learn more

XK-22 LV.5 Semi-Permanent Mold Release for Composites (G471)

  • Unique, highly effective, semi-permanent mold release for composites
  • Combines fast cure with outstanding chemical and abrasion resistance
  • Non-silicone, non-contaminating release surface
  • Operates easily above 850°F
  • Cures at ambient temperatures
  • Stable resin solution – long shelf life
  • Click to learn more

FRP 1923 WB Mold Release (G476)

  • Water-based, WOLO (wipe on, leave on) formula
  • Semi-permanent release agent for reinforced plastics
  • Keeps parts from sticking
  • Cures at room temperature
  • No need to polish molds after application
  • Click to learn more

RC-30 Mold Release (G485)

  • Time-saving release agent for molded rubber, composites, and similar materials
  • Developed for silicone rubber, elastomers, and thermoset plastic molding operations
  • Water-based, non-silicone, high temperature formula adheres on contact
  • Very low odor, chemically stable, and can be applied safely to most substrates
  • Ready immediately as a mold release or low-speed, light-load lubricant
  • Click to learn more

E455 Stoner Thermoset Mold Release

  • Convenient aerosol contains no silicones or oils
  • Eliminates the need for paste waxes
  • Allows molded parts to be painted, hot stamped, or otherwise decorated
  • Saves time – allows parts to remove quickly and easily from molds
  • Improves part appearance and reduces defects caused by sticking
  • Contains no chlorinated solvents such as methylene chloride or trichloroethylene
  • Excellent adhesion to mold surfaces
  • Click to learn more

M714 Stoner Thermoset Mold Release

  • Time-saving, anti-stick lubricant for reinforced thermosets and filament winding
  • Contains no silicones or oils
  • Eliminates the need for paste waxes
  • Ready to use – no need for dilution
  • Allows molded parts to be painted, hot stamped, or otherwise decorated
  • Saves time – allows parts to remove quickly and easily from molds
  • Improves part appearance and reduces defects caused by sticking
  • Contains no chlorinated solvents such as methylene chloride or trichloroethylene
  • Excellent adhesion to mold surfaces
  • Good for filament winding and compression molding

E497 Stoner Thermoset Mold Release

  • Convenient aerosol contains no silicones or oils
  • Eliminates the need for paste waxes
  • Allows molded parts to be painted, hot stamped, or otherwise decorated
  • Saves time – allows parts to remove quickly and easily from molds
  • Improves part appearance and reduces defects caused by sticking
  • Excellent adhesion to mold surfaces
  • Click to learn more

M704 Stoner Thermoset Mold Release

  • Time-saving, anti-stick lubricant for molded thermoset plastics, rubber, and similar materials
  • Ready-to-use, requires no dilution
  • Apply a thin coating with a spray system
  • Contains no silicone

JMA-3E Semi-Permanent Mold Release (G458)

  • Semi-permanent, high temperature formula operates easily above 850°F
  • Durable, long wearing, and not easily scratched off of mold surfaces
  • Extends mold life
  • Non-silicone, non-contaminating release surface
  • Non-transferring to molded parts
  • Allows for painting and other post-decorative processes
  • Excellent for epoxy prepreg with latex/rubber bladder

XC-33 Fluoropolymer Mold Release (G483)

  • Water-based mold coating for plastics, rubber, metals, and more
  • Non-transferring, non-silicone, dilutable emulsion
  • Forms a thin, uniform film on a wide variety of substrates
  • Parts release quickly and easily
  • Click to learn more

RR-5 Hot EF-1 Semi-Permanent Release System (G451)

  • Forms a smooth, continuous film with good adhesion to the mold surface
  • Quickly and easily releases most rubber and plastic materials
  • Multiple releases per application – increases productivity
  • No transfer – post-finishing problems virtually eliminated
  • No knit lines, cracks, or splits – low scrap rate
  • Contains no ozone-depleting chemicals
  • Click to learn more

RR-5 COLD EF-1 Semi-Permanent Release System (G457)

  • Solvent-based release agent for molded materials
  • A release base coat for RR-5 Hot EF-1, which greatly extends time between mold cleanings
  • Forms a smooth, continuous film with good adhesion to the mold surface
  • Non-transferring mold coating keeps parts from sticking
  • Lets parts release quickly and easily
  • Reduces down time and increases production
  • Contains no ozone-depleting chemicals
  • Click to learn more

E408 Stoner Dry Film Mold Release

  • Convenient aerosol contains no silicones, oils, or waxes
  • Dry, anti-stick coating provides fast, easy part removal
  • Improves molding efficiency in many processes
  • Improves part appearance and reduces defects caused by sticking
  • Formulated to provide high levels of user and environmental safety
  • Click to learn more

Have a Special Application or Mold Release Need?

We have or can formulate products for your specific molding process and materials, delivery systems, or packaging preference. Click below to discuss the next step.

Click to contact us